10
8.1 Setting Events using Rasoft Pro
HUB Events can be viewed and edited using Rasoft Pro. To open the events page in the
software select the HUB in the device editor and select the “Events” tab from the top of the
window.
Mappings List:
All Events are listed on the left hand side of the events tab. Select an event such that it is
highlighted to edit the “Event Trigger/Active Days” and “Output Action” sections for this
Event.
Event Trigger/Active Days:
The “Event Trigger” and “Active Days” are the timing conditions that define when the
event will occur.
NB
The dawn and dusk settings can be changed via the location settings in the webpage interface. An
offset from this value can be set from this screen if desired.
WK-HUB
Manual Version 1.3.4
