Documentation Center
RAK1920 Quick Start Guide
Prerequisite
What Do You Need?
Before going through each and every step on using the RAK1920 WisBlock module, make sure to prepare the
necessary items listed below:
Hardware
USB Cable
Li-Ion/LiPo battery (optional)
Solar charger (optional)
Grove PIR Motion Sensor (AS312)
Software
.
To add the RAKwireless Core boards on your Arduino board, install the RAKwireless Arduino BSP. Follow the
steps in the
Product Configuration
Hardware Setup
RAK1920 is a WisBlock Interface module, which extends the WisBlock system with an adapter board to connect
Click Boards (MikroElektronika), QWICC (Sparkfun) based, and Grove (Seeed) based sensors to WisBlock.
For more information about the RAK1920, refer to the
RAK1920 module is part of the WisBlock Interface category, which connects to the base board through the IO slot.
Also, always secure the connection of the WisBlock module by using the compatible screws.
