Raisecom RC953-GESTM1 Command Manual Download Page 8

Page: 8 / 197

24.2 crc-auto ------------------------------------------------------------------------------------------------------------------ 141

24.3 interface e1-------------------------------------------------------------------------------------------------------------- 142

24.4 interface fx-eth --------------------------------------------------------------------------------------------------------- 142

24.5 show interface ---------------------------------------------------------------------------------------------------------- 142

Chapter 25

The configuration command under fxInterface configuration mode of

remote RC953-FX8E1 --------------------------------------------------------------------- 144

25.1 flow-control -------------------------------------------------------------------------------------------------------------- 144

25.2 interface e1-------------------------------------------------------------------------------------------------------------- 144

25.3 show interface ---------------------------------------------------------------------------------------------------------- 145

Chapter 26

The device management command of remote RC953-FE4E1. --- 146

26.1 device-name ------------------------------------------------------------------------------------------------------------ 146

26.2 device-type -------------------------------------------------------------------------------------------------------------- 146

26.3 err-auto-shutdown ----------------------------------------------------------------------------------------------------- 147

26.4 fault-pass ---------------------------------------------------------------------------------------------------------------- 147

26.5 interface e1-------------------------------------------------------------------------------------------------------------- 147

26.6 interface eth------------------------------------------------------------------------------------------------------------- 148

26.7 reset----------------------------------------------------------------------------------------------------------------------- 148

26.8 show device------------------------------------------------------------------------------------------------------------- 149

Chapter 27

The configuration command under e1Interface configuration mode of

remote RC953-FE4E1. -------------------------------------------------------------------- 150

27.1 clock-mode -------------------------------------------------------------------------------------------------------------- 150

27.2 crc-auto ------------------------------------------------------------------------------------------------------------------ 150

27.3 interface e1-------------------------------------------------------------------------------------------------------------- 151

27.4 interface eth------------------------------------------------------------------------------------------------------------- 151

27.5 show interface ---------------------------------------------------------------------------------------------------------- 151

Chapter 28

The configuration command under ethInterface configuration mode of

remote RC953-FE4E1. -------------------------------------------------------------------- 153

28.1 autonegotiate ----------------------------------------------------------------------------------------------------------- 153

28.2 flow-control -------------------------------------------------------------------------------------------------------------- 153

28.3 interface e1-------------------------------------------------------------------------------------------------------------- 154

28.4 show interface ---------------------------------------------------------------------------------------------------------- 154

28.5 shutdown ---------------------------------------------------------------------------------------------------------------- 155

28.6 speed duplex ----------------------------------------------------------------------------------------------------------- 155

Chapter 29

The device management command of remote RC953-FX4E1.--- 157

29.1 device-name ------------------------------------------------------------------------------------------------------------ 157

29.2 device-type -------------------------------------------------------------------------------------------------------------- 157

29.3 err-auto-shutdown ----------------------------------------------------------------------------------------------------- 158

29.4 interface e1-------------------------------------------------------------------------------------------------------------- 158

29.5 interface fx-eth --------------------------------------------------------------------------------------------------------- 158

29.6 reset----------------------------------------------------------------------------------------------------------------------- 159

29.7 show device------------------------------------------------------------------------------------------------------------- 159

Chapter 30

The comfiguration command under e1 Interface configuration mode of

remote RC953-FX4E1. -------------------------------------------------------------------- 161

30.1 clock-mode -------------------------------------------------------------------------------------------------------------- 161

30.2 crc-auto ------------------------------------------------------------------------------------------------------------------ 161

30.3 interface e1-------------------------------------------------------------------------------------------------------------- 162

30.4 interface fx-eth --------------------------------------------------------------------------------------------------------- 162

30.5 show interface ---------------------------------------------------------------------------------------------------------- 162

Chapter 31

The configuration command under fxInterface configuration mode of

remote RC953-FX4E1. -------------------------------------------------------------------- 164

31.1 flow-control -------------------------------------------------------------------------------------------------------------- 164

31.2 interface e1-------------------------------------------------------------------------------------------------------------- 164

31.3 show interface ---------------------------------------------------------------------------------------------------------- 165

Chapter 32

The device management command of remote RC954-FE4E1. ---- 166

32.1

device-name --------------------------------------------------------------------------------------------------------- 166

32.2 device-type -------------------------------------------------------------------------------------------------------------- 166

Summary of Contents for RC953-GESTM1






































































































































































































Search results

Summary of Contents for RC953-GESTM1

Reviews:

Raisecom RC953-GESTM1, Command Manual, Page: 8 / 197

Search results

Summary of Contents for RC953-GESTM1

Reviews: