Raisecom RC3000-15, Hardware Description

Page: 113 / 273

Raisecom
RC3000-15 (P100R001) Hardware Description
8 Voice cards
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
88
For colors of the cable, see section 13.15 E&M cable.
8.4 10E&M
8.4.1 Functions and appearance
Panel Function
The 10E&M is a 10-way audio access card. It provides the following
functions:
 Provide 10 RJ45 E&M interfaces. Each interface supports 1 way of 64
kbit/s E&M service. Interfaces 1–10 are corresponding to timeslots
from TS0 to TS9 on the card.
 Support configuring the signaling type to I, II, III, IV, or V through
the jumper. By default, it is V.
 Support configuring the wiring mode to 2-wire or 4-wire. By default,
it is 4-wire.
 Support configuring the signaling mode through software:
– Support original signaling and reverse signaling. By default, it is
original signaling.
–
Support signaling occupation a-bit and b-bit. By default, it is a-bit.

Support configurable gain:
–
Rx D/A gain ranges from -3 to +27 dB.
– Tx D/A gain ranges from -13 to +7 dB.
– By default, the gain is 0 dB.
– The step is 0.1 dB.
 Support configuring analog audio to conduct internal loopback and
external loopback (supported in 4-wire mode only); support E&M
signaling to conduct internal loopback.

Support viewing signaling status.