manualshive.com logo in svg

Raisecom P100R001, Hardware Description

Product Description: The Raisecom P100R001 user manual is your comprehensive guide to unlocking the full potential of this exceptional product. Download it for free from our website and gain in-depth knowledge about the features, functions, and operation of the P100R001, ensuring a seamless user experience.

Share
Download
background image

Raisecom 
RC3000-15 (P100R001) Hardware Description 

8 Voice cards 

 

 

Raisecom Proprietary and Confidential 

Copyright © Raisecom Technology Co., Ltd. 

102 

 

8.6 Audio 

8.6.1 Functions and appearance 

Panel 

Function 

 

The Audio is a 16-way FXS/ FXO /magneto telephone access card. It provides the following 
functions: 

 

Support 16 voice interfaces. The voice interface types are specified as FXS, FXO, and 
magneto telephone. 

 

Every 2 voice interfaces use 1 voice module. Each voice module supports being specified 
as one of FXS, FXO, and magneto telephone. 

 

The voice gain is adjustable. Its step is 0.1dB: 

– 

FXS/FXO/ magneto telephone Rx (A/D) gain ranges from -10 to 16 dB. By default, it is 
0 dB. 

– 

FXS/FXO Tx (D/A) gain ranges from -13 to 10 dB. By default, it is -3.5 dB. 

– 

Magneto telephone Tx (D/A) gain ranges from -17 to 8 dB. By default, it is -3.5 dB. 

 

Support configuring signaling occupation bits: a-bit and b-bit. By default, it is a-bit. 

 

The voice interface and ringing output support overcurrent protection. 

 

Magneto telephone supports detecting and generating the 2100 Hz audio. 

 

Support E1 timeslots from TS0 to TS15 occupied by 1 to 16 ways of voice services on the 
backplane. 

 

Support online upgrade. 

 

Support configuring signaling mode to RAISECOM, user-defined mode, or other mode. 
By default, it is RAISECOM. 

 

The Audio card is used with E.40 or later RC3000-15-DXC. 
Avoid short circuit when the Audio card is running. If short circuit occurs and 
ringing lasts over 10 minutes, the Audio card will be damaged. 
Do not insert and pull out the voice module. For hardware operations on the voice 
module, contact Raisecom technique support engineers. Hot swapping the voice 
module is forbidden under any condition; otherwise, the Audio card and RC3000-
15 will be faulty. 
If a voice module fault occurs, the Raisecom technical support engineer need to 
notice the following matters: 

 

When the voice module on the Audio card is faulty, rebooting the RC3000-15 or 
inserting and pulling out the Audio card will clear configurations about all 
interfaces and cross connection (you can use the normal voice module again by 
re-configuring the card.); if rebooting the RC3000-15 or inserting and pulling out 
the Audio card is not executed, the current service of other voice modules will 
not be influenced. 

 

When the voice module on the Audio card is faulty, if there are normal voice 
modules connected to an interface neighboring to the interface with the faulty 
one (for example, the voice module on No. 2 interface is faulty, but the one on 
No. 3 interface is normal), at this time, you can configure normal voice modules 
through the NMS or CLI. In this case, you cannot delete the NE which the Audio 
card is located. Otherwise, you cannot configure the Audio card through the 
NMS even though you re-add the NE. 

 

Summary of Contents for P100R001


















































































































































































































































































Reviews:

No comments

Related manuals for P100R001

Panasonic WJFS216 - SWITCHER Service Manual preview
WJFS216 - SWITCHER
Brand: Panasonic Pages: 30
Panasonic KX-NCP Series Important Safety Lnstruct1ons preview
KX-NCP Series
Brand: Panasonic Pages: 32
Panasonic WJFS616 - SWITCHER Service Manual preview
WJFS616 - SWITCHER
Brand: Panasonic Pages: 41
Panasonic WJFS616 - SWITCHER Operating Instruction preview
WJFS616 - SWITCHER
Brand: Panasonic Pages: 60
Panasonic WJ-FS309 Operating Instructions Manual preview
WJ-FS309
Brand: Panasonic Pages: 82
Sony BDX-M1000 Installation Manual preview
BDX-M1000
Brand: Sony Pages: 36
Sony BKPF-105A Operation Manual preview
BKPF-105A
Brand: Sony Pages: 40
gefran 556 Quick Start Manual preview
556
Brand: gefran Pages: 7
Quark-Elec QK-A035 Manual preview
QK-A035
Brand: Quark-Elec Pages: 19
Maxwell 25107 User Manual preview
25107
Brand: Maxwell Pages: 12
IDEAL ND 2385-1 Instructions Manual preview
ND 2385-1
Brand: IDEAL Pages: 12
Major tech MT2005 Manual preview
MT2005
Brand: Major tech Pages: 40
Dawson Tools DAN120 User Manual preview
DAN120
Brand: Dawson Tools Pages: 22
Dawson Tools DDM640 User Manual preview
DDM640
Brand: Dawson Tools Pages: 12
Raytech MUX R Instruction Manual preview
MUX R
Brand: Raytech Pages: 40
Metrix MTX 3292 Quick Start Manual preview
MTX 3292
Brand: Metrix Pages: 2
Voltmaster DMM 1 Operating Instructions Manual preview
DMM 1
Brand: Voltmaster Pages: 76
Matco Tools ADMM50 Operating Instructions Manual preview
ADMM50
Brand: Matco Tools Pages: 24

Brands by name

Popular brands

Load more brands