RainWise MK4-C, Instruction Manual

Page: 17 / 36

| 17
Connection Status
C O N N E C T I O N S T A T U S
Confirming Your Station is Online
» Flip the toggle switch on the underside
of the station base to “ON” (fig M).
» The LED light on the PV power panel will
flash magenta. This means the station
is attempting to connect to a cellular
network.
» The light will flash green when the
station has successfully connected. Go
to
rainwise.net on your mobile device
to confirm your station is transmitting
data from all sensors. (fig N)
» Refer to the troubleshooting guide
at the end of this manual if the LED
indicator does not blink green within 20
minutes of turning the station on.
To conserve power, turn the station off if you
don’t plan on mounting it within 12 hours.
In areas with poor cellular signal strength, you
may need to optimize the station location and
antenna configuration. Get detailed instructions
on your station’s signal strength indicators at
rainwise.com/help/battery-mode
5
Note:
You may experience cellular service
interruption due to weather, location,
network limitations and other factors.
Figure N
Figure M