INSTALLATION GUIDE
22-SEP-08
H
2
OG rainwater rescue solution
YOU WILL NEED:
Saw
Level
Adjustable Wrench
90° 3½”O.D.
Elbow
(for horizontal
installation)
Plumbers
Tape
HOGs are designed to connect together
using the supplied parts. Threaded Brass
inserts at the top and bottom of each HOG
allow secure attachment of Connectors,
Vents and Outlets.
The 1 inch openings are plugged. Remove
the plugs from the holes you wish to use for
connections. Screw in the Connectors and
Elbow Vent, sealing the threads with
plumbers tape to prevent leaks. Screw the
Outlet to the end Connector. Saw the top off
the first HOG and cover with Inlet Screen.
VERTICAL
HORIZONT
AL
Inlet Screen
Downspout
Elbow Vents
HOGs
Connectors
Outlet
HOGs
Overflow
Overflow
Connectors
Outlet
Elbow Vents
Inlet Screen
Downspout
Top
Bottom
Front
AL
W
AY
S THIS W
AY UP
Side
20”
(508mm)
50 gallon
(189 litre)
capacity
9½”
(240mm)
71” (1
800mm)
Please consult a qualified plumber if unsure about correct installation procedure. Rainwater HOGs must be installed in accordance with these instructions. Rainwater HOG LLC takes no responsibility for any
loss or damage caused by the use of the HOG and/or accessories. In the interests of continuing product improvement, specification may change without notice.
