A new way to see your energy
Quick Start GUIDE
NEED HELP WITH YOUR EAGLE-200?
For a full user manual, FAQs, and to contact support:
rainforestautomation.com/eagle200_support
LED LIGHT INDICATOR KEY
LED lights on the front of the device give you a quick way to check the
status of the EAGLE-200.
V1.01
WHAT’S IN THE BOX:
•
EAGLE-200 ENERGY GATEWAY
•
AC POWER ADAPTER
•
ETHERNET CABLE
YOU WILL NEED:
•
A BROADBAND INTERNET CONNECTION VIA
ETHERNET OR WIFI
•
A COMPUTER OR DEVICE WITH A WEB BROWSER
rainforestautomation.com
POWER
ETHERNET
WIFI
CLOUD
ZIGBEE
Power is on.
IP address
obtained.
WiFi network
is active
Connected to
the Cloud
Zigbee network
is active
Model:
RFA
–
Z114
–
Z2
–
001 Control Gateway
Rainforest Automation, Inc.
Assembled in
New Hampshire U.S.A.
Contains FCC IDs:
YCXRFA
–
W900
2AC2E
–
68M04
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired
operation.
Cloud ID: 123456
MAC
: d8d5 b900 0000 0000
IN
: e80f 63cd a532 0a3d
EAGLE-200 INFORMATION LABEL
Located on the underside of the EAGLE-200 is the Information Label that
identifies each individual device. You will need the three numbers
indicated below to register the device. Please make a note of them:
Cloud ID (6 characters)
Install Code (16 characters)
MAC Address (16 characters)
