Current Section:
OFF 81
Navigation:
16.
OFF
Use this Dial position to turn off irrigation, master valve or pump and adjust display contrast.
16.1.1 Adjust Display Contrast
For better visibility, you can adjust contrast values of the controller display from 1-12 in the OFF
position.
1
Turn the controller dial to OFF
2
At the All Watering Off screen, press the and keys to adjust contrast up or down
(from 0 to 12).
16.1.2 Close Master Valves
Closes all master valves, disabling irrigation.
NOTICE
Using the MV Close function will disable all irrigation functions.
•
The Close Master Valves function closes Normally Open Master Valves. Normally Closed Master Valves
remain closed.
1
Turn the controller dial to OFF
2
At the All Watering Off screen, press the
MV Close
key.
3
At the confirmation screen, press and HOLD the
Yes
key for 4 seconds to Close Master
Valves. If you’re not sure, press
No
.
4
A confirmation screen shows the MV has closed.
5
The OFF dial position screen will now show the message “All MVs Closed. To cancel and
restore irrigation functions, turn the dial to AUTO”.