manualshive.com logo in svg

Rain Bird LXME2, Installation, Programming & Operation Manual, Page: 46 / 91

Share
Download
Rain Bird LXME2 Installation, Programming & Operation Manual Download Page 46

Current Section:

  Diagnostics  46

 

 

 

 

 

 

Navigation:

9.4.7  Station Run Times

Review  total Run Time for all stations.

CONFIRM PROGRAMS

Next

Program Summary 

Review Programs

Program Run Times

Station Run Times

Station Run Times

STA   

001

Done

PGM 01

PGM 02

HH:MM

01:20

02:00

1 

Turn the controller dial to Diagnostics

2 

At the DIAGNOSTICS screen, press the   key to select “

Confirm Programming

”, then press 

Next 

.

3 

At the CONFIRM PROGRAMS screen, press the   key to select “

Station Run Times

”, then 

press 

Next 

.

4 

At the Station Run Time screen, press the   and   keys to select the desired Station. 

Station Run Times are shown for the currently selected station in all programs.

5 

Press the   and   to scroll the list of programs. For Stations where a particular Program 

is not used then no run time is shown.

• 

To make changes make Run Time changes see “

Run Times

”.

• 

Soak times for stations set up with Cycle+Soak are not included in the Station Run Time calculations. See 

“

Cycle+Soak™

” for more details.

Summary of Contents for LXME2




























































































Reviews:

No comments