SafeTANK GR8680-TB3 User Manual
2
Front and Rear Views
3. Hardware Requirements and Precautions
1. Only one interface connection may be used at once per computer system.
2. RAID volume formation utilizes the capacity of whichever hard drive has the smallest and then
multiply that capacity by seven for RAID 5, eight for RAID 0, to form a large volume, therefore,
it is recommended to only install hard drives of the same brand and specification for all drive
position prior to use. Moreover, when you need to replace with a new hard drive, please be sure
to purchase one with the same specification, capacity and brand. If these conditions can't be met,
select one that's at least 20 GB greater in capacity.
3.
The actual storage capacity of GR8680-TB3 recognized by the system may differ from the total
capacity stated on the hard drives once the drives have been formatted.
4.
Since GR8680-TB3 will delete all data files in your HDDs/SSDs at its first-time use, please be
informed that you shall first save all your personal data files into a safe memory space before
starting setting your new GR8680-TB3 to avoid any data loss during your start-up process.
5. Please make sure that the hard drives are free from bad blocks or defects prior to installation in
order to avoid system crashes or data loss.
6.
Whenever turning off or unplugging your GR8680-TB3 from your computer system, please always
remember to safely remove it from your operating system first.
A. HDD access light
B. HDD enclosure key lock
C. HDD enclosure button
D. Mute Switch
E. System status light
F. Power switch
G. Power socket
H. Fan speed switch
I. Thunderbolt™ port
J. Mini DisplayPort
K. Anti-theft lock
Drive Position
NOTE
：
It’s a must for you to insert one disk at “Disk Position 0” bay.
硬碟位置 5
硬碟位置 6
硬碟位置 3
硬碟位置 4
硬碟位置 7
硬碟位置 0
硬碟位置 1
硬碟位置 2
