iR2777-S3 User Manual
5
6. Computer Set Up
When the hardware setup for iR2777-S3 is complete, you are now ready to turn the machine on.
After the hardware installation is complete, the iR2777-S3 will be treated as one single hard drive.
Set the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the system will
retrieve the following information:
1. In iR2777-S3, the installed hard drive can be detected by the Device Manager of Computer
Management for Windows.
2. Customers can choose to format the hard drive by using the Disk Management tool of the
operating system before using the iR2777-S3.
At this point, the installation process is completely finished. The user can freely retrieve and save
data to iR2777-S3 just like retrieving and saving data to a regular hard drive. If the user experiences
any abnormality during the operation, please refer to the trouble shooting Q&A section in Appendix.
