Raider RD-CDD04, User Manual

Page: 11 / 74

11
4.6. Use the power tool, accessories
and tool bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
5. Safety Warnings for Corded Drill Drive.
5.1. When working with Corded Drill Drive
wear ear protectors. Effects of loud noise can
damage your hearing.
5.2. Hold tight Corded Drill Drive. During
screw on and unscrew screws may occur
abruptly strong reaction moment. Loss of
control over Corded Drill Drive could lead to
the occurrence of accidents.
5.3. Keep the power cord a safe distance
from rotating work tools. If you lose control of
the screwdriver, the cable may be fascinated
by the working tool and it can cause injuries.
5.4. Always wait until the machine has
come to a complete stop before placing it
down. The tool can jam and lead to loss of
control over the power tool.
5.5. Regularly clean the vents of your
Corded Drill Drive.
5.6. Never put your hands near the rotary
working tools.
5.7. Use appropriate detectors to determine
if utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
5.8. If the supply voltage is interrupted
(for example in blackout, or if the plug is
removed from socket) unblock the trigger
and place it in position “off”. This will prevent
uncontrolled inclusion of screwdriver.
5.9. Never use the machine with a
damaged cable. Do not touch the damaged
cable and pull the mains plug when the cable
is damaged while working. Damaged cables
increase the risk of an electric shock.
Damaged power cables increase the risk
of electric shock. Failure of the considered
instructions may lead to electric shock, fire
and / or severe injuries.
6. Functional description.
Electric Corded Drill Drive is a manual
power tool with insulation class II. He is driven
by a collector single-phase motor whose
speed is reduced by means of gear. These
kinds of power tools are widely used to screw
on and unscrew screws in plasterboard,
wood, wood paneling, dendroid materials,
metal and facade paneling. Fast and precise
fastening through optimal coordination of
speed and torque, screw on series on fixed
parts by service with easy one-handed
screwing-depth stop and accurate declutch.
Screwdriver can be used by extension for bits
and bits with different length and hexagon
size .
Not permitted the use of power tools for
activities other than its intended purpose.
7. Information on emitted noise and
vibration.
Measured values determined according
to EN 60745. Typically the A-weighted noise
levels of the product are: Sound pressure
level Lp
A
= 87 dB(A); Sound power level Lw
A
=
98 dB(A). Uncertainty K=3 dB.
Wear hearing protection! Vibration
total values (triax vector sum) determined
according to EN 60745:
Screw on: Vibration emission value a
h
= 4.1
m/s
2
. Unscrew: Vibration emission value a
h
<
2.5 m/s
2
, Uncertainty K = 1.5 m/s
2
. The vibration
emission level given in this information sheet
has been measured in accordance with a
standardized test given in EN 60745 and may
be used to compare one tool with another. It
may be used for a preliminary assessment
of exposure. An estimation of the level of
exposure to vibration should also take into
account the times when the tool is switched
off or when it is running but not actually doing
the job. This may significantly reduce the
exposure level over the total working period.
8. Preparing for the job.
Insert the appropriate bit, according to the
size and type of screws or bolts.
9. Inclusion and exclusion.
Beware of the voltage of supply network!
Tension of the supply network must comply
with the details shown on the plate of power
tools. Appliances marked with 230V, can be
supplied with voltage 220V.
9.1. To start the machine, press the On/Off
switch (1) and keep it depressed. To lock the
pressed On/Off switch (1), press the lock-on
button (2). To switch off the machine, release
the On/Off switch (1) or when it is locked with
the lock-on button (2), briefly press the On/Off
switch (1) and then release it.