RAID N8103-134, Setup Manual

Page: 57 / 80

856-127900-408- B
56
1-2. Disk Array Creation Procedure
1. Select [Main Menu]->[Disk Array Management]
2. If there exists Disk Array in the list, Disk Array created already. In case there does not exist Disk Array
or add new Disk Array, select [Create Disk Array] with arrow key(up/down) and press <Enter>.
3. Indicates available HDDs to configure Disk Array. Select all HDDs which you want to use for creating
Disk Array with key <space> and select [Save Configuration].
„
If you use plural number of HDDs. Use HDDs of the same capacity.
„
If the HDD which capacity is different is connected, ask your sales representative.
„
If Physical Drive status is not ‘OK’ when you use new disks or it for maintenance,
ask your sales representative.