Rubber strap
Patented bike holder
Bike support arm
Hubs
Handle
Upper strap
Safety strap
Buckle
Protective foam pad
Middle strap
Bottom strap
Hook
Rubber foam
1
2
3
4
5
6
7
8
9
10
11
12
13
6
5
1
3
4
2
After the bike carrier is correctly
placed as illustrated in diagram 3,
tighten the black hubs by flipping
the hub lever inward.
Make sure the teeth of the black
hubs are interlocked evenly.
Begin attaching straps with the
upper pair by pressing the buckle
to release the strap.
Placing the hooks in the most
forward trunk lid opening(between
rear window and trunk lid), and then
pulling on the end of the strap until it
is tight. Caution: Never install the
hook on the plastic spoiler.
Thank you for purchasing bike
carrier from us. First please
check all items in the box: bike
carrier, 6 rubber straps, 4
protective foam pad, 2 Velcro
straps, and 2 tie down straps.
Loosen the black hubs by flipping
the hub lever outward This will
allow the two sections of the rack
frame to move relative to one
another for correct placement on
your vehicle.
Rest the bike carrier on the rear
bumper of vehicle. Note: the
protective rubber pads on lower
frame should be rest between the
bumper and trunk. Rear brace should
rest on the trunk lid and the
supporting arm should be adjusted
10 to 30 degree above the horizon.
