INSTRUCTIONS FOR USE
6
LM05EN002
B.1
RESPONSIBILITY
The manufacturer Ragazzini S.r.l. is not responsible for:
Improper use of the machine or its use for purposes other than those envisaged;
Failure to comply with the instructions for use and maintenance provided by Ragazzini S.r.l.;
Failure to comply with the regulations and safety measures contained in this manual and/or in the
supplementary documentation provided;
Any tampering, replacement or modification (not authorised in writing by the manufacturer
Ragazzini S.r.l.) of one or more parts of the machine;
Any intervention that is not part of ordinary maintenance.
Therefore, Ragazzini S.r.l. is not responsible for any direct or indirect damage deriving from failure to
comply with the above mentioned indications.
B.2
ORIGINAL VERSION OF THE INSTRUCTIONS
This document was originally issued in Italian.
In the event of disputes due to translated versions, even if provided by Ragazzini S.r.l, the only valid text
shall remain solely and exclusively the original Italian version.
B.3
CONFORMITY OF THE PRODUCT
The machine described in these instructions was designed and built to be installed in a plant with industrial
characteristics.
The machine is marketed:
With EC declaration of conformity pursuant to directive 2006/42/EC, annex II, point 1 A.
With EC declaration of conformity pursuant to directive 2014/34/EU, annex X, letter b (ATEX
version).
Any modification that alters the design and construction characteristics of the machine in terms of the place
of use and of safety and risk prevention, may only be carried out by the manufacturer, who will
subsequently certify its compliance with the safety standards in force.
Any changes in location, modifications or maintenance operations not contemplated in this document are
to be considered unauthorised.
Under no circumstance will Ragazzini S.r.l. be held responsible in case of non-compliance with the above
safety dispositions.
