Radwin 2000+ SERIES, User Manual

Page: 82 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 5 ‐ 18
Preferences: Advanced
Enable RSS Extended View: Checking this box enables a dual chain view for RSS. Disabled, the
RSS is shown as a single bar for each radio. The effect is visible immediately.
Figure 5 ‐ 13: RSS Extended view enabled
Figure 5 ‐ 14: RSS Extended view disabled
Enable Tx/Rx Extended View: Place a checkmark here to enable viewing the Rx and Tx rate of
each LAN line attached to the unit. Disabled, the rate shown is an aggregate
rate for both LAN lines.
This will appear in all cases, but will only have meaning if your unit has more
than one LAN line, and if they both are connected. See Chapter 4, Hardware
Installation for the external connections of the unit you are using.
Figure 5 ‐ 15: Tx/Rx Extended View enabled
Figure 5 ‐ 16: Tx/Rx Extended View disabled
Enable Unicode in Text fields: This allows you to write non ‐ standard text in the various fields
you use. We do not recommend this because it would be difficult or impossible
to coordinate with systems and equipment that may not be able to detect this
text, and you could therefore lose connections.
Map View Background Mode: You have a choice of two map providers , a default or a self ‐
chosen background. If you log on without an Internet connection, you will get
a default gray background or, if you have caching enabled , your last used map.
If you want a background image for the map view, choose Background Image
then click the explorer button to select the location of the image file.