Radwin 2000+ SERIES, User Manual

Page: 139 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 7 ‐ 26
Management
An Auto Detect feature is provided, whereby the line speed and duplex mode are detected
automatically using auto ‐ negotiation. Use manual configuration when attached external
equipment does not support auto ‐ negotiation. The default setting is Auto Detect.
The icon next to the CRC error count may be clicked to reset the counter to zero.

To configure the Ethernet Mode:
• In the Ethernet Ports Configuration pane, use the drop ‐ down menus to choose the
required modes.
Operations
Figure 7 ‐ 17: Restore Factory Settings, License Activation and Change ODU Mode
Do not reconfigure the port that is used for the managing computer
connection, since a wrong configuration can cause a management
disconnection or Ethernet services interruption.