Radware DefensePro VA, Installation And Maintenance Manual

Page: 60 / 83

DefensePro VA Installation and Maintenance Guide
DefensePro VA Installation and Configuration
60
Document ID: RDWR-DPVA_IG2005
8. Wait until the deployment is completed.
Configuring the Network Adapters
1. From the Home > Inventory drop-down menu, select Templates and VMs .
2. In the VM Inventory tree , right-click the desired DefensePro VA from the list, and then select
Edit Settings .
Note: If no virtual machines are displayed, verify that Show VMs in Inventory is selected in
the Vsphere client View menu option.
3. Assign each network adapter to the pre-defined network connections for management, clients,
and servers.
Configuring the DefensePro VA VM Settings
After successfully deploying the OVA, you have to resize the VM by setting the vCPUs, disk, and RAM
size, assign the created virtual switch for data ports, and add a serial connection for console.