Radware DefensePro 6.02, User Manual

Page: 56 / 339

DefensePro User Guide
Basic Device Configuration
56
Document ID: RDWR-DP-V0602_UG1201
To configure DefensePro e-mail settings
1. In the Configuration perspective Setup tab navigation pane, select Email Settings.
2. Configure the parameters; and then, click (Submit) to submit the changes.
Note: To configure users to receive e-mails about errors, in the User Table, set the e-mail
address and notification severity level for each user. For information about configuring
users, see
Configuring Device Users, page 154 .
Configuring RADIUS Authentication for Device Management
DefensePro provides additional security by authenticating the users who access a device for
management purposes. With RADIUS authentication, you can use RADIUS servers to determine
whether a user is allowed to access device management using CLI, Telnet, SSH or Web Based
Management. You can also select whether to use the device User Table when RADIUS servers are
not available.
Note: The DefensePro devices must have access to the RADIUS server and must allow device
access.
Table 8: DefensePro E-mail Parameters
Parameter Description
Basic SMTP Parameters
Enable Email Client Enables the e-mail client. Select to support features that are related
to sending e-mail messages.
Default: Disabled
Enable Sending Email upon
Errors Enables sending notifications via e-mail.
Default: Disabled
SMTP Server Parameters
Primary Server Address IP address of the SMTP Server.
Alternate Server Address An IP address of an alternative SMTP Server. The alternate SMTP
server is used when SMTP connection cannot be established
successfully with the main SMTP server, or when main SMTP server
closed the connection. The device tries to establish connection to the
main SMTP server, and starts re-using it when available.
SMTP Client Parameters
Email Address Mail address that will appear in the Sender field of e-mail messages
generated by the device, for example device1@domain.com.