Radware Alteon Installation and Maintenance Guide
Initial Configuration
Document ID: RDWR-ALOS-V2815_IG0203
61
5. To save the configuration, enter save.
For more information on configuring Alteon VA, see the Alteon Application Switch Operating Switch
Application Guide.
Further configuration of Alteon VA can be performed through one of the management interfaces.
Once the license is set and the IP addresses have been configured on the data ports, Alteon VA is
able to receive configurations through the data ports.
Obtaining and Installing a Permanent License for Alteon VA
License options include 200 M, 500 M and 1 Gbps throughput licenses with 1 Mbps license for
Development, Testing and Staging environments.
Notes:
>>
Radware offers a 30-day free trial version of Alteon VA including all the features and the
capabilities of the licensed version.
>>
To download the trial version please visit: www.redhatmarketplace.com.
>>
During the evaluation period, you have to purchase Alteon VA and install a permanent
license to continue using it.
To obtain and install a permanent license
1. To obtain a permanent license, you have to provide the VM MAC address to Radware Technical
Support.
2. To get the VM MAC address, enter /oper/swkey in the CLI.
3. After you will receive the license, enter the CLI command /oper/swkey license_string, where
license_string is the license provided to you by Radware Technical Support. A confirmation
message is displayed when the license installation is complete.
This procedure gives you perpetual use of Alteon VA. If you have purchased a 200 Mbps, 500 Mbps,
or 1 Gbps throughput license, you also must install it using the /oper/swkey command.
