82
26.6. List of commands computer - balance
Function
RESET INTERFACE
Command
R CR LF (zero actual orders, restore factory setting)
Function
SEND ALL COMMANDS FROM THE BALANCE
Command
PC CR LF (all recorded information in commands in the balance
programme are sent from the balance)
Function
SEND THE RESULT IN BASIC UNIT
Command
S CR LF (result is sent from the balance in basic interval after stability)
Function
SEND RESULT IN BASIC UNIT IMMEDIATELY
Command
SI CR LF
Function
SEND THE RESULT IN ACTUAL INTERVAL
Command
SU CR LF (result in actaul unit is sent from the balance after stability)
Function
SEND RESULT IN ACTUAL INTERVAL IMMEDIATELY
Command
SUI CR LF
Function
ZERO THE BALANCE
Command
Z CR LF (set the balance to zero after it reaches stability)
Function
ZERO IMMEDIATELY
Command
ZI CR LF
Function
TARE WHEN STABLE
Command
T CR LF
Function
TARE THE BALANCE IMMEDIATELY
Command
TI CR LF
Function
SWITCH CONSTANCE TRANSMISSION OFF IN BASIC INTERVAL
Command
C0 CR LF
Function
SWITCH
CONSTANCE
TRANSMISSION IN BASIC INTERVAL
Command
C1 CR LF
Function
SWITCH CONSTANCE TRANSMISSION OFF IN ACTUAL INTERVAL
Command
CU0 CR LF
Function
SWITCH CONSTANCE TRANSMISSION ON IN ACTUAL INTERVAL
Command
CU1 CR LF
Function
NUMBER OF THE BALANCE
Command
NB CR LF
