18
6.3. Return to weighing
Introduced changes in settings will be saved after return to weighing
mode with procedure of saving changes.
Fig. 6. Return to weighing
After introducing all changes in parameters settings press several times
ESC
key. When display indicates message, choose one of two options:
ENTER
– save changes
ESC
– without saving
7. WEIGHING
Basic conditions which should be fulfilled to ensure reliability of measurements:
9
stable base for balance,
9
choice of appropriate parameters for existing external conditions
Before measurements or in case of essential changes of external conditions,
balance should be calibrated according to manual (for verified balances,
function of calibration is not accessible for user)
Before measurements check if unloaded balance indicates „precise zero” –
indicated pictogram -
- in left lower corner (only when
P4 06 Autozero
parameter is set on
1: yes
or
P4 07
for second platform), if balance doesn’t
indicates zero press key:
.
If conditions for zeroing are unfavourable (lack of stable result), display
indicates horizontal lines. After exceeding set zeroing time of balance will
return to weighing without performing zeroing. In such case wait for
stabilization of conditions and press again
key.
Place on the pan weighed load and when results are stable (indicated
)
read on the display result of weighing.
