RADWAG PUE HY10, User Manual

Page: 39 / 305

39
Procedure:
•
Enter < Devices> parameter group as described in chapter
16 of the manual,
•
Choose „ Computer / E2R System / System is active”
and then set an appropriate value.
Accessible settings:
- System is not active
- System is active
•
If during cooperation with < E2R System> product selection lock
is required for operators, go to parameter < Lock selecting
products> and set its value to .
•
pictogram is displayed at the home screen top bar to inform you that
< System is active> parameter has been activated.
16.2. Printer
In < Printer> submenu users can:
•
Set communication with a printer,
•
Set code page of a printer,
•
Set templates of printouts,
•
Activate/deactivate printout of demanded standards.
To enter < Printer> , press and then
:
„ Printer” .