RADWAG PUE HY10, User Manual

Page: 37 / 305

37
16.1.2. Computer address
Procedure:
•
Enter < Devices> parameter group as described in chapter
16 of the manual,
•
Choose „ Computer / Address” then the window <Address>
with the screen keyboard appears,
•
Enter the required address and confirm it by pressing .
16.1.3. Continuous transmission
Users can enable continuous transmission from the scale to a computer.
Setting parameter < Continuous transmission> starts subsequent
sending data from < Weighing Printout Template> set in submenu:
„Setup / Devices / Computer / Weighing Printout Template” .
Procedure:
•
Enter parameters’ group < Devices> according to ch. 16 of this
manual,
•
Choose „ Computer / Continuous transmission” and then
set an appropriate value.
Accessible settings:
- Continuous transmission off
- Continuous transmission on
16.1.4. Weighing printout template
Users in parameter < Weighing Printout Template> can define
variables included in the printout from the scale to a computer.