RADWAG PUE HY10, User Manual

Page: 149 / 305

149
A report on control will be saved to < Controls> database, report’s status -
< Terminated > .
30.11.2. Procedure of control completion
Completion of control realized in accordance with internal criteria may be
carried out in two ways:
•
Automatically
All samples control – number of controlled samples accordant with
declared value in
<Sample quantity> parameter. On completion of the
control a process summary is generated (see point 30.8 of this manual).
The control is automatically saved to database.
•
Manually
Pressing beforehand defined key (finish the control). When the
key is pressed the following message is displayed.
Pressing key means getting back to the control in progress.
Pressing key means finish of the control. Finish of control results
in getting back to PGC mode setting window.
Caution:
Pattern and example of a report on control is described in point 30.14 of this
manual.