26
Ethernet
IP Address: IP address of the scale.
Port: number of port for transmission protocol.
Timeout [ms]: time delay - time interval for disconnection, counted from
the moment of the most recent command sent from the peripheral
device to which the weighing device is connected.
10.2.2. Address
Parameter allowing you to set address of scale connected with the computer.
Procedure:
•
Enter
<Peripherals / Computer / Address>
submenu,
<Address>
edit
box is displayed.
•
Enter the address and press
key to confirm changes.
10.2.3. Weighing Printout Template
Template of an individual printout designed using scale and sent to a computer.
Procedure:
•
Enter
<Peripherals / Computer / Weighing printout template>
submenu,
<Weighing printout template>
edit box is displayed.
•
Modify the template and press
key to confirm changes.
10.2.4. Continuous Transmission
Parameter allowing you to activate 'scale' - 'computer' continuous transmission.
In order to send the content of
<Weighing printout template>
to a computer
continuously you must activate
<Continuous transmission>
parameter.
Procedure:
•
Enter
<Peripherals / Computer / Continuous transmission>
submenu
and set respective value.
Options:
Continuous transmission disabled.
Continuous transmission enabled.
Summary of Contents for PUE HX5.EX
Page 1: ...PUE HX5 EX WEIGHING INDICATOR SOFTWARE MANUAL ITKP 01 04 12 18 EN...
Page 2: ...2 DECEMBER 2018...
Page 96: ...96...
