26
kal.
uzy t.
g
g
Gcor
If the scale is calibrated at the place of use then
gravitational correction value (<g-cor.> parameter) is
1.00000. If the scale is calibrated away from the place of use
(longitudinal change) the value of <g-cor.> parameter must
be corrected.
Procedure:
Enter
<
Factory /
Metrology>
submenu.
Select
<g-cor.>
entry,
<g-cor.>
dialog box with an on-screen keyboard
opens.
Enter a respective value and press
button to confirm.
Return to weighing, saving changes.
10.8.2. Gravitational Acceleration Method
The method consists in automatic calculation of the value of gravitational
correction,
<g-cor.>
, on the basis of:
gravitational acceleration of the place where the calibration/adjustment
is carried out,
gravitational acceleration of the place of use.
Procedure:
Enter
<
Global /
g-cor.>
submenu.
Select
<g-cor. method>
entry,
<Enter g-cor. value for adjustment
place>
dialog box with an on-screen keyboard opens, the box provides
value of gravitational acceleration for RADOM city in Poland.
If the scale is adjusted in RADOM, press
button to confirm
the displayed value.
If the scale is adjusted elsewhere, enter the value respective for
a particular spot and press
button to confirm.
<Enter g-cor. value for place of use>
dialog box with an on-screen
keyboard opens automatically.
Enter a respective value and press
button to confirm, a message
providing the calculated
<g-cor.>
(gravitational correction) value
is displayed.
