- 42 -
12. CHECKWEIGHING
Checkweighing is a function that enables precise weighment of a sample for
which minimum and maximum weighing threshold, so called checkweighing
thresholds, have been determined (LO – to little mass of the sample, HI – to
big mass of the sample, OK – correct mass of the sample).
These states are presented through light signaling or through steering of
peripheral devices systems.
Fig.26 States range for checkweighing function
Caution:
Starting procedure of checkweighing function and its signaling have been
presented in point 9.6.2 of this manual.
12.1. LO threshold
<LO threshold>
parameter detemines net mass upon exceeding which the
checkweighing function activates.
Procedure:
•
Click parameter window:
•
Enter
LO
threshold value.
Lo
> 0 <
MIN
MAX
OK
HI
Próg Min
Próg Max
Summary of Contents for PUE 5.15
