- 132 -
next measurement can be performed. The balance operates with previously set
parameter values (liquid, temperature) thus shortening time needed for the
exact measurement.
17.8.2.
Return to the weighing mode
17.9. Density of liquid
Density of liquid
function enables
determination of any liquid density.
Using this function requires an additional kit for density determination (optional
equipment). It is the same kit like for determination of solids density (description
above).
Settings for button shortcuts are the same as for <SOLIDS DENSITY> function
(see the previous point).
17.9.1.
Density determination
The basic element for measuring the density of liquids is the sinker (9). Its
volume is precisely determined and given on a sinker’s hanger. Before starting
liquid density determination, insert the value of sinker’s volume to balance
memory. In order to measure the density of liquid, first determine mass of the
sinker in the air. Then, measure mass of the same sinker in tested liquid. The
result of liquid density determination is automatically indicated on balance
display.
In order to determine the liquid density you need to:
•
Install the density determination kit,
•
Enter <DENSITY OF LIQUIDS> function
