- 108 -
•
The total mass of all the pieces put on the weighing pan must not be
greater than the balance maximum weighing range.
•
The mass of a single piece cannot be lower than 0,1 reading unit of the
balance. If this condition is not met, the balance displays message:
<Too low sample mass>.
•
While determining the number of pieces, wait for the stability pictogram
, next confirm the quantity.
•
You can confirm the declared quantity by pressing
button only
after the stability pictogram is displayed. Otherwise, the balance will
not accept the measurement.
17.3.3.
Setting the reference mass by entering its value
Procedure:
•
Press F button to which the function <ENTER SAMPLE> is assigned,
wait to see the editing window <ENTER SAMPLE>
•
Use arrow buttons to insert the known single sample mass value.
•
Confirm the entered mass by pressing
button,
•
The balance software automatically counts a single sample mass and
enters the mode <
PARTS COUNTING
> displaying the number of
