RADWAG PS 10100 R2, User Manual

Page: 52 / 95

- 52 -
•
Press F button to which function < DETERMINE SAMPLE > is assigned, < PUT 100% > editing
window is displayed.
•
Place the reference sample (to represent 100%) on the pan, and when the result is stable (
symbol is displayed) press button to confirm.
•
The software automatically enters the measured load value as a reference sample and enters
<
PERCENT WEIGHING > mode displaying the value of 100.000%, the bottom line displays
reference mass value (if such an option has been selected for < INFORMATION > function).
•
11.6.2. Setting the Reference Mass: Entering Mass Value
Procedure:
•
Press F button to which function < ENTER SAMPLE > is assigned, < ENTER SAMPLE > editing
window is displayed.
•
Use arrow buttons to enter the known reference mass value, press button to confirm.
•
The software automatically enters < PERCENT WEIGHING > mode displaying the value of
0.000%, the bottom line displays entered reference mass value (if such an option has been
selected for <
INFORMATION > function).
•
11.7. ANIMAL WEIGHING
Animal Weighing mode enables reliable determining of mass of objects that is in motion. In principle,
objects in motion generate unstable measurement, thus Animal Weighing mode requires using a
different filtering method of measurement signal.