RADWAG MW-01 Series, User Manual, Page: 38 / 39

38
Procedure:

Run the program, enter connection settings and select Offline parameter,
press button.

In the weighing result window, a message presented in the fig. 31
is displayed.

Set parameters and save the configuration to the file, the description is
to be found in point 11.1 of this user manual.
13. ERROR MESSAGES
Err2 Value beyond zero range.
Err3 Value beyond tare range.
Err8 Time of the taring/zeroing exceeded.
NULL Zero value from converter.
FULL Weighing range exceeded.
HI Display range exceeded.
LH Start mass error, indication out of range (-5%
– +15% of start mass).