RADWAG MAS 1. Y, User Manual

Page: 43 / 201

- 43 -
15. WEIGHING
Load the weighing pan. Wait for a stable indication (display of stability marker,
) and
read the measurement result.
Record/printout of the measurement result is available on pressing <PRINT> key:
•
for verified balances – only stable measurement result is saved or printed (stability
marker visible on balance’s display),
•
for non-verified balances – stable and unstable measurement results are saved or
printed (regardless of stability marker absence). For unstable measurement result
question mark <? > is printed next to the mass value.
15.1. Weighing Unit Selection
Change of weighing unit is carried out by pressing the weighing unit pictogram visible next to
the value of measurement result. Upon pressing the weighing unit, list of available units is
displayed. Select the unit you need, the software automatically recalculates indicated value.
Options:
unit denotation
verified
balance
unit denotation verified balance
gram [g] yes Taele Hongkong [tlh] no
milligram [mg] yes* Taele Singapore [tls] no
kilogram [kg] yes* Taele Taiwan [tlt] no
carat [ct] yes* Taele China [tlc] no
pound [lb] no Momme [mom] no
ounce [oz] no Grain [gr] no
ounce Troy [ozt] no Newton [N] no
pennyweight [dwt] no Tical [ti] no
* - units accessibility is conditioned by the weighing instrument type.
For unverified weighing instruments all non-SI units are available.
15.2. Good Weighing Practice
To assure long-term operation and correct mass measurements, follow the rules presented
below:

Start the balance with no load on the weighing pan (permissible value of load on
the weighing pan at start is ±10% of the maximum capacity).
Load the weighing pan steadily avoiding
shocks
Place weighed loads centrally on the
weighing pan
Avoid side loading, in particular side shocks