RADWAG MAS 1. Y, User Manual

Page: 19 / 201

- 19 -
3.6. Temperature Stabilization Time
Before start of the measuring processes, it is necessary to wait until the balance reaches
thermal stabilisation.
Balances stored in much lower temperatures, than the workroom temperature, before being
plugged to the mains (e.g. during winter period) must be subjected to thermal stabilisation.
The thermal stabilisation period takes about 12 hours. During the thermal stabilization, the
indications on the screen can change. Potential workroom temperature change shall occur
gradually and slowly in the course of the weighing instrument operation.
3.7. Connecting Peripheral Equipment
Use only accessories and peripheral equipment recommended by the manufacturer. The
balance must be disconnected from the mains before connecting or disconnecting any
peripherals (printer, PC computer, computer keyboard of USB type, additional display). Upon
connecting the peripherals, plug the balance to the mains.