RADWAG MAS 1. Y, User Manual

Page: 12 / 201

- 12 -
I/O cable
1.3. Intended Use
The weighing module is based on electromagnetic digital converter. The modules are
intended for installation on technological lines or in laboratory equipment which require
mass measurements of the accuracy not lower than 0.1 mg.
Communication with the module is carried out directly via RS 232 interface or optional
operator panel.
Measurements can be carried out using weighing pan or under-pan weighing system -
when the load is suspended beneath the module
(does not apply to MAS.1 module) .
The modules feature internal adjustment, triggered by temperature change, and definable
time interval as well as the weighing pan overload protection. They are also equipped
with the following communication interfaces: 1 x RS 232, USB type B
(does not apply to
MAS 1. module) , PS/2.
Possible configurations:
connected with Y series operator panel.