- 45 -
Stability character
[space] if stable
[?] if not stable
[^] if an indication over the range
[v] if fan indication below the range
sign
[space] for positive values or
[-] for negative values
mass
9 characters justified to the right
unit
3 characters justified to the left
command
3 characters justified to the left
Example 1:
_ _ _ _ _ _ 1 8 3 2 . 0 _ g _ _ CR LF –
the printout generated from
the scale after pressing ENTER/PRINT.
Example 2:
? _ - _ _ _ _ 2 . 2 3 7 _ l b _ CR LF -
the printout generated from
the scale after pressing ENTER/PRINT.
Example 3:
^ _ _ _ _ _ _ 0 . 0 0 0 _ k g _ CR LF
- the printout generated from
the scale after pressing ENTER/PRINT.
18.6. Continuous transmission
The indicator can work in a continuous transmission mode.
It can be switched on using RS232 commands (see 20.4).
18.7. Configuring printouts
General information
If some information included are redundant or not sufficient and there
is a necessity of changes one can design their own protocol format in
EDYTOR WAG
computer program.
This piece of software is accessible
in: http://www.radwag.com
Summary of Contents for ITKU-20-02-01-12-A
Page 2: ...2 JANUARY 2012...
