- 29 -
CAUTION!
Zeroing the display indication is possible only within the ±2% range of instrument’s
maximal capacity. If the zeroed value is above the ±2% of the maximal capacity,
then the software indicates an error message Err2.
9.3 Tarring
Tarring is a function allowing to determine net weight of a measured object. In order
to determine net weight of the object, place object’s container (packaging) on the
weighing pan, and on stabilization of measurement result press
key. The
display should indicate mass equal to zero and symbols:
Net
and
. On taking
off the weighed load and its packaging from instrument’s weighing pan, the display
indicates sum of total tarred mass with minus sign.
The software also enables assigning tare value to a product from a database.
Then, on product selection from a database, the software automatically uploads
data on tare value for the specific product.
CAUTION!
Tarring negative values is impossible. On tarring negative values the scale
responds with an error message Err3. In such case zero scale indication and
repeat tarring procedure.
Manual tare determination
Procedure:
•
For any operating mode, press quick access button F, to which the option
<ENTER TARE> has been assigned in <SHORTCUTS> settings (
read <F
shortcut keys> section for detailed instruction).
•
Wait for a respective window to open.
•
Use arrow buttons to enter tare value and press
button.
•
The scale returns to weighing mode, the display indicates entered tare
value with minus „–" sign.
Selecting tare out of TARE DATABASE
Procedure:
•
For any operating mode, press quick access button F, to which the option
<SELECT TARE> has been assigned in <SHORTCUTS> settings (
read
<F shortcut keys> section for detailed instruction),
or press
button
firts and click <SELECT TARE> next.
•
Wait for the first packaging weight, recorded in tare database, to be
displayed.
