4
1. BASIC INFORMATION
1.1. Intended use
Thermometer is designed to be used for adjustment and control of the drying
temperature in moisture analyzers of RADWAG company production.
Temperature is measured in [
°
C].
Thermometer enables temperature measurement thanks to a temperature
sensor installed on a cable in a special holder. The holder simulates drying
chamber shield of a moisture analyzer and that is why temperature
measurement during temperature adjustment process and during temperature
test process is carried out in conditions identical with those that occur during
the samples drying process.
CAUTION:
Control thermometer is used for MAY type RADWAG moisture analyzers
and for MAX and MAC moisture analyzers being in production from 6th
June 2013.
1.2. Precautions
A. Before the first use please read the User Manual thoroughly, use the
device according to its intended purposes.
B. Keep the thermometer set in its factory packaging in order to protect it
from any incidental damages.
C. The holder and the thermometer tip can be cleaned with a damp piece
of cloth that was dipped in the alcohol substance. Be careful while
cleaning the set so that not to cause any damage. Be especially careful
while cleaning the measuring tip due to a delicate protective coating of
the sensor. Damaged coating may lead to misleading readings. If the
coating has been damaged it should be repaired by RADWAG
company.
D. The temperature sensor and the shield elements cannot be separated.
E. No liquid or solid substances can be poured into the holder since it
might cause damages.
F. This set can be used only for its intended use, namely to adjust or
control the temperature in a RADWAG moisture analyzers drying
chamber.
G. If no longer used the device and its packaging are to be utilized in
accordance with the current law.
Summary of Contents for GT105K-12/Z
Page 2: ...2 DECEMBER 2013...
