RADWAG AS R2.PLUS, User Manual

Page: 25 / 98

- 25 -
process is aborted, balance returns to the weighing mode. Adjustment process may be repeated upon removal
of the excess load.
7.3.2. External Adjustment
The external adjustment for PS series balances should be carried out with an external mass standard
of class F
1
(function unavailable for verified balances).
Procedure:
•
Run an external adjustment process, the balance displays a command ordering to unload the
weighing pan, <REMOVE MASS> (the weighing pan must be empty). When the weighing pan
is unloaded, press button.
•
The balance determines mass of an empty pan, message < CALIBRATION > is displayed in the
bottom line. Next, message < PLACE MASS > and mass value to be placed on the weighing
pan are displayed, e.g. 200.000g (depending on the type of balance).
•
Place an external adjustment weight of displayed mass value and press button . The
balance determines the mass, message < CALIBRATION > is displayed in the bottom line. On
completing adjustment process the balance returns to submenu P1.2 EXT.CALIB.
7.3.3. User Adjustment
The external adjustment for PS series balances should be carried out with an external mass standard
of class F
1
(function unavailable for verified balances).
Procedure:
•
Run an external adjustment process, the first step of the process is to declare the mass of a
weight that is to be used for adjustment. The mass must be
≥
30% Max capacity.
•
Once the mass of the weight is entered and confirmed, the message prompting the user to
remove the weight from the pan is displayed: <REMOVE MASS> (the weighing pan must be
empty). Unload the pan and press button.
•
The balance determines the weight of an unloaded pan, message < CALIBRATION > is shown
in the bottom line. Next, message < PLACE MASS > and mass value to be placed on the
weighing pan are displayed, e.g. 200.000g (depending on the type of balance).
•
Place an external adjustment weight of displayed mass value and press button . The
balance determines the mass, message < CALIBRATION > is displayed in the bottom line. On
completing adjustment process the balance returns to submenu P1.2 EXT.CALIB.
7.4. ADJUSTMENT REPORT PRINTOUT
At the end of each adjustment process or adjustment test, an adjustment report is generated
automatically and sent to a communication port COM 1. The content of the report is declared in menu
P5.1 CAL REPORT.
The instruction on how to declare settings for this option is described in section about printouts.
The report can be printed out via a printer connected to the balance or it can be sent to the computer
and saved as a file for archiving purposes.
8. DETERMINING PRINTOUT CONTENT
8.1. ADJUSTMENT REPORT
P5.1 CAL. REPORT, is a group of parameters enabling user to declare data that is to be printed on
an adjustment printout.