Preparing for a Video Call or Videoconference | 26
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Connecting the Computer
You need a computer to share a presentation during a call. This procedure describes how to
connect computers that are equipped with a DVI out or VGA out connector.
The XT Codec Unit supports these DVI input formats: 1920 x 1080, 1440 x 900 (WSXGA), 1280 x
1024 (SXGA), 1280 x 720, 1280 x 768 (WXGA), 1024 x 768 (XGA), 800 x 600 (SVGA), 640 x 480 (VGA).
Procedure
Step 1
Connect your computer to the XT Codec Unit:
Caution
Make sure all units are switched off whenever connecting or disconnecting devices.
•
For computers and laptops with a DVI out connector, connect the DVI cable to the DVI-I socket
of the XT Codec Unit and connect the other end of the cable to the computer.
Figure 5-1
Connecting a computer to SCOPIA XT5000 Series
•
For computers with a VGA output connector, use a DVI to VGA adapter.
a.
Connect the DVI-VGA adapter to the DVI-IN socket of the XT Codec Unit.
b.
Connect a VGA cable to the adapter. This cable is not supplied with the system.
