Getting Started | 13
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Configuring Gatekeeper Settings
If your SCOPIA XT Series works in conjunction with a gatekeeper, configure gatekeeper-related
settings. Use this section to configure gatekeeper settings.
This procedure completes the basic system configuration.
Before You Begin
This procedure is performed as part of the basic configuration after
.
Procedure
Step 1
Set the Enabled list to Yes.
Figure 3-6
XT Codec Unit
Step 2
Set the Mode list to Manual.
Step 3
Enter the IP address of the gatekeeper in the IP address field.
Step 4
Enter the H.323 number required to dial the XT Codec Unit in the Number H.323 field.
Step 5
Select Done.
The basic configuration of your SCOPIA XT Series is complete.
