Setting the System Name and Language
About this task
You can select the name of your XT Codec Unit, to be displayed on the monitors participating in the
videoconference call (for example:
Hong-Kong
, or
9th-Floor-Room
, or
NY-Office
), and on the system's
titlebar.
There is also a unicode version of the system name for users who want the name displayed on the
titlebar to contain non-English characters. For more information, see
Modifying the System's Name on
You can also select the country in which the system is located and the language in which the system
menus are displayed.
After initial setup, you can modify these settings by selecting
Configure > General
from the
Main
menu,
or from the web interface as described in
Remotely Setting the System Name and Language
on page
90.
Before you begin
Access the quick setup wizard from the endpoint or web interface, as described in
Procedure
1. Enter the name of the Scopia XT Series in the
System Name
field. This name is also used
for the SIP username and the H.323 name, which can be manually changed.
If you perform this task from the endpoint interface, use the alphanumeric keys of the XT
Remote Control Unit (for more information, see
Using the XT Remote Control Unit
on page
68).
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 84
