Figure 3-20
In-call menu
The system sends a pre-defined image to the remote endpoint, indicated by the
icon on
your display.
You can configure your Scopia XT Series to block video input from your local endpoint by
default at the start of each call. For more information see
“Blocking Video Input by Default”
.
Adjusting the Volume
Press
+ or - on the XT Remote Control Unit to adjust the sound you hear when receiving a
call and during a videoconference.
To change the default speaker volume, perform the procedure in this section. This can be
done from the endpoint itself or from the Scopia XT Series web interface.
Procedure
Step 1
Access the volume settings, as follows:
•
From the endpoint's main menu, select Configure > Calling from the Main menu.
•
From the XT Series web interface, select Basic Settings > Call-Answer mode > General.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Making Point-to-Point Video Calls | 54
