RADVision SCOPIA Elite 5230, Platform Manual

Page: 10 / 23

4 SCOPIA Elite 5230 Platform Guide
SCOPIA Elite 5000 Media Blade Panel Features
SCOPIA E
LITE
5000 M
EDIA
B
LADE
P
ANEL
F
EATURES
Figure 1-3 Media Blade Front Panel
Table 1-2 Media Blade Panel Features
STATUS
RESET
HOT SWAP
MEDIA BLADE
5 2 1 6 4
3
Component Description
1 STATUS LED Lights green to indicate normal operation. Lights red to
indicate that an error has occurred and that the Media
Blade requires resetting.
2 Serial connector A DB-9 connector that allows you to connect a PC
terminal for local configuration, maintenance and
debugging.
3 100/1000 BASE-T
Ethernet connectors RJ-45 connectors that provide the primary LAN
connection for the IP network port.
4 Ethernet connector
Link/Activity LEDs The top part of each Ethernet connector contains two LED
indicators. The right LED lights green when the local IP
network link is active. The left LED lights green if the
connection speed reaches 1000 Mbps, and lights orange if
the connection speed reaches 100 Mbps.
5 RESET button Allows you to reset the Media Blade manually.
6 HOT SWAP LED Lights blue when the latches of the board are unlocked and
it is safe to remove the board from the chassis, and during
reset. Goes off when the board is completely detached.