Change the Configuration Software Password 15
2.
To modify the IP address, type the new IP address
of the card followed by the subnet mask, in the
format <IP address:subnet mask> as shown in
.
3.
Press
Enter
to proceed to the next setting;
otherwise, just press
Enter
to proceed to the next
setting.
4.
Type the default Gateway IP address and press
Enter
to proceed to the next setting; otherwise,
just press
Enter
to proceed to the next setting.
5.
Press any key to return to the main MVP
configuration menu.
C
HANGE
THE
C
ONFIGURATION
S
OFTWARE
P
ASSWORD
Change the configuration software password as follows:
Procedure
1.
At the colon, type
P
.
The user profile screen displays.
Figure 7
User Profile Screen
2.
Type the new user name and press
Enter
to
proceed to the next setting.
3.
Enter the new password and press any key to
return to the main MVP configuration menu.
Enter user name:
Enter new password:
