RADSON Purmo Tempco CP W, User Manual

Page: 28 / 252

28
4.3 Installation
In this menu you will found all configuration parameters of the
installation. (Sensors, type of regulation, Heat & Cool function...)
To enter in the installation menu move the navigation cursor on the
“
Installation
” line and press
(OK) .
4.3.1 Regulation Sensor
In this submenu you must choose the sensor which will be used for
the regulation of the room managed by the programmer
thermostat.
To change the sensor, move the navigation cursor in front of the
desired line and Press
(Ok)
to valid “

”.
Ambient:
- The programmer will regulate the temperature in the room with
this internal sensor.
Floor (ext):
(external sensor is needed 10k at 25°C)
- The external sensor is used as floor sensor to regulate the
temperature of the floor.
Regulation Sensor

Ambient

Floor (ext)
Amb. + Limit 1
Amb. + Limit 2
...
Installation

Regulation Sensor
Regulation type
Calibration sensor
Pump exercise
Units AM/PM...
Main Settings
Language English
Clock adjustment

Installation
Display
Factory settings