RadonTec AlphaAir Freshbox 100 WiFi Page 6 Manual Download

Page: 6 / 64

Manual

–

AlphaAir Freshbox 100 WiFi

The warnings contained in this user manual must be
taken particularly seriously as they contain important
information regarding personal safety.

Failure to follow the safety instructions may result in
injury or equipment damage.

2.1

Safety precautions during unit installation

Before any installation or repair
procedure,

the

unit

must

disconnected from the power supply.

The unit must be earthed!

Do  not  operate  the  unit  outside  the
temperature range specified in the  user
manual  or  in  aggressive  or  explosive
environments.

Do not use damaged equipment or
wiring to connect the unit to the mains.

Observe the specific safety regulations
for the use of power tools when installing
the appliance.

Summary of Contents for AlphaAir Freshbox 100 WiFi

































































Search results

Summary of Contents for AlphaAir Freshbox 100 WiFi

Reviews:

Related manuals for AlphaAir Freshbox 100 WiFi

Brands by name

Popular brands

RadonTec AlphaAir Freshbox 100 WiFi, Manual

Search results

Summary of Contents for AlphaAir Freshbox 100 WiFi

Reviews:

Related manuals for AlphaAir Freshbox 100 WiFi

Brands by name

Popular brands