Pneumatic
positioner
RX- 500 Series
1. GENERAL
The pneumatic positioner RX-500 is used for rotary operation of
pneumatic rotary valve actuators by means of pneumatic control
systems with an output signal of 3-15psi or split ranges.
2. FEATURES
• There is no resonance in the range of 5(200Hz.
• Performing 1/2 Split Control without any other substitutes.
• Easy to adjust zero and span.
• Easy to convert from Reverse Action to Direct Action or vice versa.
• Fast and accurate response
• Low air consumption
• Easy to protect from hunting effect by using output orifice in
small size of actuator.
• Designed as Multi-port type of for air tubing
• Easy to install air tubing connection in any direction
• Designed as modular structure for maintenance and repair
INSTRUCTION
MANUAL