RadiSys EPS-6315, Hardware Reference Manual, Page: 4 / 123

EPC
®
-6315 Hardware Reference
iv
Notational conventions
This manual uses the following conventions:
•
Screen text and syntax strings appear in this font.
• All numbers are decimal unless otherwise stated.
• Bit 0 is the low-order bit. If a bit is set to 1, the associated description is true
unless otherwise stated.
Where to get more information
About EPC-6315
You can find out more about EPC-6315 from these sources:
• Readme file : Lists features and issues that arose too late to include in other
documentation.
• World Wide Web : RadiSys maintains an active site on the World Wide Web. The
site contains current information about the company and locations of sales
offices, new and existing products, contacts for sales, service, and technical
support information. You can also send e-mail to RadiSys using the web site.
G Carrier card design Provides guidelines for designing a carrier card that
supports Monarch mode.
H EPC-6315 test board Provides guidelines for designing a a full ATX sized,
four PMC site circuit board to begin production, test,
and early development using the EPC-6315.
Chapter/appendix Description
Notes indicate important information
about the product.
Tips indicate alternate techniques or
procedures that you can use to save
time or better understand the product.
The globe indicates a World Wide
Web address.
The book indicates a book or file.
ESD cautions indicate situations that
may cause damage to hardware via
electro-static discharge (ESD).
Cautions indicate potentially
hazardous situations which, if not
avoided,
may result in minor or
moderate injury, or damage to
data or hardware. It may also
alert you about unsafe practices.
Warnings indicate potentially
hazardous situations which, if not
avoided,
can result in death or
serious injury.
Danger indicates imminently
hazardous situations which, if not
avoided,
will result in death or
serious injury.
RadiSys web site
When sending e-mail for technical support, please include information
about both the hardware and software, plus a detailed description of the
problem, including how to reproduce it.